Pinnacle Technology PP7MX Скачать руководство пользователя страница 15

Страница: 15 / 33

page mode as follows:



Horizontal starting position = (xL + xH

256) (horizontal motion unit)



Vertical starting position = (yL + yH

256) (vertical motion unit)



Printing area width = (dxL + dxH

256) (horizontal motion unit)



Printing area height = (dyL + dyH

256) (vertical motion unit)



The default settings are as follows:



xL = 0, xH = 0, yL = 0, yH = 0



dxL = 0, dxH = 2, dyL = 126, dyH = 6



This command is enabled only in page mode. If this command is processed in standard mode, an

internal flag is activated and this command is enabled when the printer selects page mode.



The horizontal and vertical motion units use the horizontal and vertical values set by the GS P command.

The default settings of the horizontal and vertical motion units are 1/180 and 1/360 inches, respectively.

Note:

●

In standard mode, the printer executes only internal flag operations with this command is input.

●

If the horizontal direction starting point or vertical direction starting point is outside of the printable region,

the command is stopped and normal printing commences from subsequent data.

●

If the horizontal direction length or vertical direction length is 0, the command is stopped and normal

printing commences from subsequent data.

●

The character expansion starting point is the point specified by selecting the character printing direction

(ESC T) in page mode in the print region.

●

If (horizontal direction starting position + horizontal direction length) exceeds the printable region in the

horizontal direction, the horizontal direction length is set to (horizontal direction printable region - horizontal

direction starting point).

●

If (vertical direction starting po vertical direction length) exceeds the printable region in the vertical

direction, the vertical direction length is set to (vertical direction printable region – vertical direction starting

point).

●

The basic calculated pitch is set by GSP (Set basic calculated pitch). Also, the set printing region is not

changed even if the basic calculated pitch is changed after setting the print region.

●

If the calculation results in fractions, the pitch is corrected to a minimal mechanical pitch and the rest is

discarded.

●

The basic calculated pitch (x) is used in the calculated pitch for the horizontal direction starting point and the

length in the horizontal direction; and the basic calculated pitch (y) is used in the calculated pitch for the

vertical direction starting point and the length in the vertical direction.

●

The print region shown in the figure below when the horizontal direction starting is X; the vertical direction

starting point is Y; the horizontal direction length is Dx; and the vertical direction length is Dy.

Содержание PP7MX


































Результаты поиска

Содержание PP7MX

Отзывы:

Бренды по названию

Популярные бренды

Pinnacle Technology PP7MX, Руководство по управлению

Результаты поиска

Содержание PP7MX

Отзывы:

Бренды по названию

Популярные бренды