5
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
© 2020 Pinnacle Climate Technologies, Inc.
Kerosene Forced Air Heater User’s Manual
ASSEMBLY INSTRUCTIONS (140T-KFA / 190T-KFA / 215T-KFA)
SPECIFICATIONS
Model #
45-KFA
80T-KFA
140T-KFA
190T-KFA
215T-KFA
Rating: Btu/Hr / kW
45,000 / 13.2
80,000 / 23.4
140,000 / 41
190,000 / 55.7
215,000 / 63
Fuel Consumption: Gal/Hr / L/Hr
0.35 / 1.3
0.63 / 2.38
1.1 / 4.16
1.42 / 5.38
1.63 / 6.17
Fuel Tank Capacity: Gallons / Liters
5 / 19
5 / 19
10 / 38
13 / 49
13 / 49
Pump Pressure: psi / BAR
3.0 / 0.21
4.2 / 0.29
6.6 / 0.46
8.5 / 0.59
9.0 / 0.62
Volts: AC/Hz
120VAC / 60Hz
120VAC / 60Hz
120VAC / 60Hz
120VAC / 60Hz
120VAC / 60Hz
Amps
1.4
1.5
2.4
2.7
2.8
Phase
Single
Single
Single
Single
Single
Specifications subject to change without notice.
FEATURES
Hot Air Outlet
Upper Shell
Handle
Extension Cord Wrap
Fan Guard
Pressure Gauge
Fuel Gauge
Fuel Cap
Power Cord
Fuel Tank
Power/Reset Switch
Thermostat Knob
(80T KFA Only)
Lamp
Lower Shell
Upper Shell
Power
Cord
Drain Bolt
Fuel Tank
Pressure
Gauge
Fan Guard
Rear Handle
Digital Temperature
Display
Lamp
Thermostat
Knob
Fuel Cap
Fuel Gauge
Lower Shell
Hot Air
Outlet
1. Tilt the heater tank backward and attach the Wheel
Support Frame by inserting it into the button spring
clips at the back of the bottom support frame.
2. Attach the axle supports by inserting them into
the button spring clips at the front of the bottom
support frame.
3. Insert the axle through the holes in the axle supports.
4. Slide the spacers onto the axle.
5. Slide the wheels onto the axle and secure with the
axle nuts.
6. Attach the rear handle by inserting the handle
into the button spring clips at the rear of the top
support frame.
7. Check all parts to ensure they are secure before
operating the heater.
Figure 1
Axle
Axle Nut
Spacer
Tire
Axle Support
