•
Place the Humidifier Power Base onto the Base.
•
Remove the Fan Blade Nut (2) and the Rear Grill Lock Nut (4) from the Motor Shaft Spindle
(n).
•
Fit the Rear Grill (5) by positioning it onto the location pins (p). Secure the grill (5) to the
Motor Body with the Grill Lock Nut (4). Note: The handle on the Rear Grill (5) must face
upward.
•
Push the Fan Blade (3) onto the Motor Shaft Spindhe (n) by matching the Slots on the Base
of the Fan Blade with the Shape Pin (o).
•
Secure the Blade (3) with the fan Blade Nut (2) by turning it COUNTER - CLOCKWISE.
Check that the fan blade rotates freely by turning it with your hand.
•
Open securing clips around the front grill and loosen the clip screw at the top of the front
grill. Position the top clip on the uppermost part of the rear grill. Push the top clip down and
press rim of the front grill onto the rear grill. Close all the clips and tighten the safety screw.
•
Place the Water Tank on the Humidifier Power Base.
•
Connect the Mist Delivery Hose to the Mist Outlet and the Cap of Water Tank.