ASSEMBLING YOUR FAN
•
Unpack all the parts of the fan and remove the packaging.
•
Insert the 2 Standing Bars into the Base with 2 screws in each bar. Note that each Standing
Bar has 2 holes on one side. This side with the holes must be installed into the base. (Each
Standing Bar comes with 2 screws already fitted. Unscrew the screws from the Standing
Bars and then insert the Standing Bars into the Base).
2 screws in each Standing Bar
Remove screws first then attach
Standing Bars to the Base. Tighten
the screws after fixing Standing Bars
to the Base.
•
Place the weight under the Base then assemble with 4 screws provided.
•
Ensure that the weight is correctly assembled as depicted in diagrams below.
INCORRECT
CORRECT
•
Assemble the main unit onto the 2 Standing Bars. Note that there are 2 screws on the Main
Unit which the installer must loosen before installing. After installing, these 2 screws can be
tightened.
