User manual RXN-406 Keypad for CAPTAIN-i Alarm System
9
To disarm the alarm system in HOME mode:
[
any
User Code
To bypass/re-arm a bypassed alarm zone:
[
Primary Code
[
zone number
[
NOTE:
When Bypass mode is executed, it is effective until you disarm the
system.
To reset the smoke or fire detector:
Press and hold
for three seconds till confirmation beep.
To identify the last zone(s) that caused an alarm:
Press and hold
. You will hear a beep, and the
corresponding zone light(s) will be lit for 10 seconds.
To enable/disable the Chime mode:
Press and hold
for three seconds till confirmation beep.
NOTE:
This mode activates a buzzer in the keypad when a chime zone is
triggered. This feature can be used to monitor unauthorized entry or
exit in the defined zone when the system is not armed. To learn how
to program a Chime Zone see section “To Program Chime Zone”,
page12.
To temporarily cancel the Entry Delay Time:
Press and hold
for three seconds till confirmation beep.
NOTE:
When this feature is enabled, it is effective until you disarm the
system.
Reporting DURESS Event to CMS/Private Dialer:
