Pima CLW532, Руководство пользователя

Страница: 12 / 36

FORCE Alarm System User Guide
12 PIMA Electronic Systems
Chap. 4 Arming and Disarming
 You can find detailed information on the arming modes in the
Glossary, on page 29.
 From here onwards, in addition to the Master code you can use any
user code with permissions.
4.1 Arm Away
User Menu

Arming & Disarming

Arm Away
Arming
Away is used when the premises is left vacant and all the detectors are activated.
Follow the next steps to arm Away.
1.
Check for the
Ready to Arm message and illuminating LED. Ready to Arm is displayed only
when all the zones (detectors) are closed and no fault exists.
2. Press and hold the key until the keypad beeps (enter a user code with permission, if
required). Alternatively, press

enter User code

Arming & Disarming

Arm Away.
3. The Exit Delay 3 starts running immediately (the keypad keeps beeping and displays a
progress bar timer) and when elapsed, the entire alarm system becomes armed. During
the delay you can stay in delayed zones without setting off the alarm. Entering an instant
zone will set off the alarm.
The technician can set the siren to beep to indicate on arming and disarming
4.2 Arm in Home 1-4
User Menu

Arming & Disarming

Arm in Home 1-4
Home 1-4 arming modes are used in defined parts of the premises - floors, separate rooms,
perimeter detectors, etc. - when it is partially occupied, or during night time.
In these arming modes some zones (detectors) are armed, while others stay disarmed -
triggering an armed zone setts off the alarm, while disarmed zones can be occupied at the
same time. The technician can define up to 4
Home modes.
To arm in the Home modes, do the following:
1. To arm in
Home 1, press and hold the key until the keypad beeps (enter a user code
with permission, if required). To arm in
Home 2-4, press and hold the corresponding keys.
Alternatively, press

enter User code

Arming & Disarming

Arm in Home 1-4.
2. The Exit Delay 3 starts running immediately 4 (the keypad keeps beeping and displays a
progress bar timer) and when elapsed, only the Home defined zones become armed.
3 See the Glossary, on page 29.
4
The technician can cancel the exit delay in the
Home
modes.