Installing the modules
Installation Manual PSSuniversal
21262-EN-07
37
[1]
[2]
[3]
5.5.2
Install a connection plate on the right
Procedure:
}
Use a screwdriver for slotted-head screws (M2).
}
Attach the terminating plate to the mounting rail as the final element on the system [1].
}
Loosen the fixing screw on the end bracket until the terminals are far enough apart for
the end bracket to be positioned on the mounting rail.
}
Place the end bracket on the mounting rail, to the right of the terminating plate [2].
}
Slide the end bracket and terminating plate into each other [3]
}
Slide the terminating plate with integrated end bracket up to the final base module as
far as it will go [4]; ensure that contact is made with the integrated bus terminating res-
istors.
}
Insert the screwdriver into the terminating plate [5]
}
Tighten up the integrated end bracket [6].
If an additional metallic end bracket is required to secure the system, this additional end
bracket is installed to the right of the terminating plate.