Installing the modules
Installation Manual PSSuniversal
21262-EN-07
30
[2]
[1]
[3]
5.2
Base modules
5.2.1
Installing base modules
Prerequisite:
}
The head module must be installed.
}
If the head module does not have an integrated power supply, a supply voltage module
must be installed to the right of the head module.
Please note:
}
For mechanical reasons it is not possible to mix base modules with screw terminals and
base modules with cage clamp terminals.
}
All contacts should be protected from contamination.
}
The mechanics of the base modules are designed for 50 plug in/out cycles.
Procedure:
}
We recommend that you wire up the base modules before inserting the electronic mod-
ules.
}
Slot the groove on the base module on to the mounting rail from below [1].