Pilz PSSu E S 2AI I se-T, Руководство по эксплуатации

Страница: 3 / 39

Contents
Operating Manual PSSu E S 2AI I se(-T)
21417-EN-04
3
Section 1 Introduction 5
1.1 Validity of documentation 5
1.1.1 Retaining the documentation 5
1.1.2 Terminology: System environment A and B 5
1.2 Definition of symbols 6
Section 2 Overview 7
2.1 Module structure 7
2.2 Module features 7
2.3 Front view 8
Section 3 Safety 10
3.1 Intended use 10
3.2 Safety regulations 11
3.2.1 Use of qualified personnel 11
3.2.2 Warranty and liability 11
3.2.3 Disposal 11
Section 4 Function description 12
4.1 Block diagram 12
4.2 Module features 12
4.2.1 Functions 12
4.2.2 Integrated protection mechanisms 13
4.3 Configuration 13
4.3.1 Scaling 14
4.3.1.1 ADC raw value and initialisation value 15
4.3.1.2 Hardware calibration 15
4.3.1.3 Manufacturer scaling 16
4.3.1.4 User scaling 17
4.3.1.5 Example calculation 17
4.3.2 Digital filter 18
4.3.3 Limit values 18
4.3.4 Data formats 19
4.3.5 Summary and overview 20
4.3.6 PSSu assignment in system environment A 21
4.3.6.1 Addresses in the process image 21
4.3.6.2 Status byte 22
4.3.7 PSSu assignment in system environment B 23
Section 5 Installation 24
5.1 General installation guidelines 24
5.1.1 Dimensions 24
5.2 Installing the base module 25
5.3 Inserting and removing an electronic module 26
5.3.1 Inserting an electronic module 27
5.3.2 Removing an electronic module 28
5.3.3 Changing an electronic module during operation 28