Pilz PSEN opII4H Series Скачать руководство пользователя страница 54

Страница: 54 / 57

PSEN opII4H Series

Operating Manual PSEN opII4H Series
1003501-EN-02

Receiver

Product type

Features

Order no.

PSEN opII4H-
s-30-015 receiver

For safety light grid for hand protection, protected field height of 150
mm

632360

PSEN opII4H-
s-30-030 receiver

For safety light grid for hand protection, protected field height of 300
mm

632361

PSEN opII4H-
s-30-045 receiver

For safety light grid for hand protection, protected field height of 450
mm

632362

PSEN opII4H-
s-30-060 receiver

For safety light grid for hand protection, protected field height of 600
mm

632363

PSEN opII4H-
s-30-075 receiver

For safety light grid for hand protection, protected field height of 750
mm

632364

PSEN opII4H-
s-30-090 receiver

For safety light grid for hand protection, protected field height of 900
mm

632365

PSEN opII4H-
s-30-105 receiver

For safety light grid for hand protection, protected field height of 1050
mm

632366

PSEN opII4H-
s-30-120 receiver

For safety light grid for hand protection, protected field height of 1200
mm

632367

PSEN opII4H-
s-30-135 receiver

For safety light grid for hand protection, protected field height of 1350
mm

632368

PSEN opII4H-
s-30-150 receiver

For safety light grid for hand protection, protected field height of 1500
mm

632369

PSEN opII4H-
s-30-165 receiver

For safety light grid for hand protection, protected field height of 1650
mm

632370

PSEN opII4H-
s-30-180 receiver

For safety light grid for hand protection, protected field height of 1800
mm

632371

Appendix

Check list

The checklist below is intended as an aid in for the following work on a safety light grid of
PSEN opII4H Series:

}

commissioning,

}

recommissioning, and

}

running the specified regular check.

Note that the check list is not intended to replace the plant-specific safety analysis required
for commissioning/recommissioning, nor the resulting inspections and actions.

INFORMATION

Commissioning, recommissioning and regular inspection may only be car-
ried out by qualified personnel.

We recommend that you keep the completed check list and store it with the machine docu-
mentation for reference.

Содержание PSEN opII4H Series


























































Результаты поиска

Содержание PSEN opII4H Series

Отзывы:

Pilz PSEN opII4H Series, Руководство по эксплуатации, Страница: 54 / 57

Результаты поиска

Содержание PSEN opII4H Series

Отзывы: