Commissioning
Operating Manual PNOZ m ES EtherNet/IP
1003387-EN-05
18
}
The IP address that is set at the DIP switch is used. DHCP is therefore disabled.
DIP switch
"IP address"
Meaning
Example:
IP address 020
D
OFF
ON
(MSB)
(LSB)
1 2 3 4 5 6 7 8
ON
1
0
128
D
2
0
64
D
3
0
32
D
4
0
16
D
5
0
8
D
6
0
4
D
7
0
2
D
8
0
1
D
Obtain IP address automatically via DHCP Server
The IP address can be assigned automatically via a DHCP Server
In order to do this, DHCP must be activated on the fieldbus module PNOZ m ES EtherNet/
IP.
}
DHCP is already activated when the module is delivered. The IP address is obtained
automatically from the DHCP Server when the DIP switch is set to 0. The module waits
to receive an address from a DHCP Server.
}
If a fixed IP address was set previously and you wish to activate DHCP via DIP switch,
set the DIP switch to 255.
DHCP will always then be used, irrespective of the configuration in the web server.
Set IP address via web server or Ethernet/IP Scanner
For details of how to set the IP address via the implemented web server, refer to the sec-
tion entitled
If a fixed IP address has been assigned via EtherNet/IP Scanner or via the web server,
then this will be used.
Please note:
}
If you are setting the IP address via the web server, the DIP switch must not be set to
255.
}
If you are setting the IP address via the Ethernet/IP Scanner, the DIP switch must be
set to 0 and DHCP must be active.
