Operation
Operating Manual PNOZ m ES EtherCAT
1003057-EN-04
17
7
Operation
When the supply voltage is switched on, the PNOZmulti safety system copies the configur-
ation from the chip card.
The LEDs “POWER”, “DIAG”, “FAULT”, “IFAULT” and “OFAULT” will light up on the base
unit.
The expansion module PNOZ m ES EtherCAT is configured and started automatically. The
LEDs "L/A 1" and "L/A 2", "Run " and "Error" indicate the status of thePNOZ m ES Ether-
CAT on EtherCAT.
