Pilz 312434, Руководство по эксплуатации

Страница: 4 / 75

Contents
Operating Manual PSSu K F EI CV(-T)
1004290-EN-04
4
5.3 Install/uninstall connector 41
5.4 Install labelling bracket 42
Section 6 Wiring 43
6.1 Connectors' mechanical connection 43
6.2 Connect/disconnect the cables 44
6.3 Supply voltage 45
6.4 Connection of proximity switches 46
6.5 Connection of encoders 47
6.5.1 Connect encoder 48
6.5.2 Connect encoder with Z index 48
6.5.3 Connect encoder via an adapter 49
6.6 Connection of proximity switch and encoder 50
6.7 EMC-compliant wiring 51
6.8 Function test during commissioning 53
Section 7 Operation 54
7.1 Messages 54
7.2 Display elements 55
7.2.1 Display elements for module diagnostics 55
7.2.2 Display elements for input and output status 56
Section 8 Technical details 57
8.1 Safety characteristic data 60
Section 9 Supplementary data 62
9.1 Categories 62
9.1.1 Safety level 62
9.1.2 Safety functions 62
9.1.3 Safety-related characteristic data for operation with non-safety-related en-
coder without additional requirements 63
9.1.3.1 Permitted sensor types and output signals 63
9.1.3.2 Safety-related architecture 64
9.1.3.3 Achievable safety level 64
9.1.4 Safety-related characteristic data for operation with non-safety-related en-
coder with mechanical fault exclusion 64
9.1.4.1 Permitted sensor types and output signals 64
9.1.4.2 Safety-related architecture 65
9.1.4.3 Achievable safety level 65
9.1.5 Safety-related characteristic data for operation with non-safety-related en-
coder with diagnostics via the drive controller 66
9.1.5.1 Permitted sensor types and output signals 66
9.1.5.2 Requirements of the drive controller 66
9.1.5.3 Safety-related architecture 67
9.1.5.4 Achievable safety level 67
9.1.6 Safety-related characteristic data for operation with a safe encoder 67
9.1.6.1 Permitted sensor types and output signals 68