Pilote C700G 2018, Руководство пользователя

Страница: 63 / 78

63
7.4.2 Water system
An unoccupied, unheated motorhome must be protected against mould and bacteria while wintering. Respect the following
rules to properly drain the entire fresh water installation.
Draining freshwater and wastewater systems
• Empty the wastewater tank by activating the drainage valve. For vehicles with a double floor
only, first open the drain plug located at the bottom of the tank.
• Empty the fresh water tank through the inspection plug located, depending on the model,
under the cushions of the front bench seat or under the inspection flap located in the floor
at the rear of the vehicle. Open the drain bung in the bottom of the tank.
• Leave the mixer taps open in a central position and place the shower nozzle on the bottom
of the shower tray.
Draining the water heater
• To empty the water heater, turn the blue lever 180°. The press button releases and the water in the water heater can flow.
• Turn the pump on (on the control panel) to drain the water from all the pipes. Emptying is complete when no water flows
from the water-heater valve.
The pump may carry on working for several minutes
without deterioration, even when empty.
Clean inside the tanks. The presence of stagnant water,
even a small amount, encourages bad smells or algae.