Pilot Air SILENT K17SI, Инструкция по эксплуатации и техническому обслуживанию

Страница: 21 / 45

21 | P a g e Silent Series Rev 01 03-2020
12.Maintenance
SAFETY RULES CONCERNING MAINTENANCE OPERATIONS
Compliance with the provisions of all safety laws is essential before and while performing any
maintenance operations.
1) Electrical components:
Disconnect the compressor from the mains supply before carrying out operations on the electrical
panel or rotating parts.
2) Air supply circuit:
Disconnect the compressor from the mains supply and make sure that there is no pressure in the
internal circuits and sump before carrying out operations or disassembling parts of the pneumatic
circuit.
3) Control panels:
Disconnect the compressor from the mains supply before disassembling any panels, especially before
opening the control panel.
Should you have any problems in connection with the compressor, our technical department is at your
complete disposal to carry out any operations during the period of guarantee in addition to all scheduled
maintenance operations or other activities after the guarantee has expired.
MAINTENANCE
Correct and regular maintenance is essential in order to ensure efficiency and long service life. For
this purpose, we have drawn up a list of all the maintenance operations and checks (see Table 1),
including the frequency with which these operations should be carried out. The hours of service
between maintenance operations defined in the table are those recommended in order to ensure
efficiency.
The frequency of operations may be changed according to ambient operating conditions. Routine
maintenance operations need not be carried out by specially trained maintenance personnel. However,
the pump unit and other important parts should preferably be overhauled by qualified technicians or
maintenance operators. If necessary, contact your dealer.