Pilot Air SILENT K17SI, Инструкция по эксплуатации и техническому обслуживанию

Страница: 12 / 45

12 | P a g e Silent Series Rev 01 03-2020
5. Safety Rules
3. Risks in connection with pressurized parts.
All parts designed to carry pressurised liquids are oversized and are checked and tested before
leaving our works. Their mechanical strength is adequate to withstand hostile operating
conditions without generating any problems. However, problems may arise in connection with
unexpected malfunctioning of parts available on the market, such as pipe fittings, dehumidifiers,
hoses. Check the condition of these parts regularly, avoid stress due to collisions, verify the
condition of threads on fittings, make sure that all seals are securely in place and that there are
no cuts on the surface of rubber parts.
4. Risks in connection with the lubricants used.
Not all lubricants are approved for use or are able to guarantee long service life and efficiency of
parts. Only use the lubricants specified in these instructions for use and maintenance. Dispose of
all lubricants according to applicable legal and safety guidelines.
5. Risks in connection with the use of the compressor in environments with potentially
explosive dust or highly flammable solvent or liquid fumes.
The compressor comprises electrical components suitable for use in non-flammable
environments only. Compressors required to operate in environments exposed to the aforesaid
risks must be modified before use. Please contact the manufacturer.
6. Risk of fire.
Some parts of the compressor may become extremely hot ( 99° C ) and represent a potential fire
hazard in the presence of substances that are highly flammable or with a flash point below that
temperature. Places where compressors are installed must be kept clean at all times. Do not
stack unnecessary materials in the immediate vicinity of the compressor, especially combustible
solvents or paint.
7. Risks in connection with the alteration of the micro-climate inside the works.
When running, the compressor takes in and processes air. Incorrect installation could have
adverse effects on the health and safety of those inside the building.
8. Risk of noise.
The user is responsible for the safety of the machine and the use thereof, and must immediately
replace any parts or accessories that are faulty or that may undermine safety. Should any of the
safety rules set forth in this handbook fail to comply with local laws, the user must comply with
the set of rules that guarantee the highest degree of safety.