6
Pin hinge(24x24mm)
Make sure hinges are
mounted in the same line.
1mm
Aileron
Trailing
edge
Make sure they are in
the right position while
installing.
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
2
Collar (2mm)
2
2
2
Screw (2x10mm)
Nut (2mm )
2
Washer(2x5mm)
2
Clevis
Servo tray(70x58x2mm)
Control horn
8
6
2
2
Rod (2x300mm)
TP Screw (2.3x12mm)
Pin hinge(24x24mm)
Nut
Washer 2x6mm
Screw 2x10mm
Collar
Install the nylon control horn and connect the linkage.
Assemble the aileron to main wing with instant type
CA glue.
Keep some space about 1mm width between aileron
and trailing edge.
Accessory list for the coming installation steps.
Apply instant type CA glue to aileron and pin hinge.
Install the aileron servo to the servo mount as illustration
below.
1
2
3
4
5
1
Trim the cowling along the shaded line.
Epoxy the exhaust to the cowling from lnner.
1.5mm
5
TP Screw (2.3x8mm)
Ply (15x15x3mm)
5
TP Screw (2.3x8mm)
Epoxy the plies under the cowing in fuselage and assemble
the cowing to fuselage with TP screw.
TP Screw (2.3x12mm)
Wooden Block
TP Screw (2.3x12mm)
Collar (4mm)
Collar (4mm)
Wooden supporter
Install the wheel to the fixed landing gear.
Wooden Block
2
8
Collar (4mm)
Wheel (75mm)
Wooden supporter
Landing gear(4mm)
2
1
4
4
TP Screw (3x12mm )
Landing gear straps
1
Plastic mount
4
2
Landing gear(4mm)
1
Wheel (65mm)
16
TP Screw (2.3x12mm)
2
Gear door
16
TP Screw (2.3x12mm)
Landing gear straps
4
Collar 4mm
4
Linkage Stopper
2
1
Rod (2x400mm)
Mount the receiver and the battery in the fuselage.
12
63
62
64
60
61
Accessory list for the coming installation steps.
