Start-up PikoLoad
Guideline Installation PikoLoad
Page 25 / 32
Version 1
There is not need for a CTC II to configure a Stoneridge tachograph for remote Download
on C_CAN.
The settings can be done at the tachograph by using a valid workshop card in slot1 and
the input of the correct PIN.
By pressing “OK” you will enter the menu. Use the arrow keys to scroll to „SETTINGS“ and
press „OK“:
Figure 22: Display Stoneridge „SETTINGS“
Choose „Parameter“ by using the arrow keys and press „OK“.
Figure 23: Display Stoneridge „Parameter“
Choose „Download CAN selection and press „OK“.
Figure 24: Display Stoneridge „Download CAN selection“
