Start-up PikoLoad
Guideline Installation PikoLoad
Page 15 / 32
Version 1
4.3.2
Start of the Remote Download Tests with a USB-Stick
Be sure that a company card is inserted in the slot of the PikoLoad.
Be sure that the PikoLoad is connected to the tachograph and power supply and
the ignition is on. Please make sure that ignition is not switched off during the
test run as it might result in an error message.
Insert the USB-stick with the following file in the PikoLoad:
File name: RemDwlTest.PSS
Content File: ACTION:RemDwlTest<CR><LF>
Figure 13: Content of the file for Remote Download Test
Please note that:
•
The file must be stored in the root directory of the USB-Stick
•
After the remote download test run the file will be deleted automatically
at the
USB - Stick
The test starts automatically (see LED display) after the plug-in of the USB-Stick
containing this file.
After the test run the test result is stored on the USB-stick. The end of the test
run is shown by the LED display. Now remove the USB-Stick.
Note:
The test works with all valid company cards. It is not necessary that the
data are locked to this company.
