27
S
ta
rtKi
t3
.E
.1
.1
3
PiiGAB M-Bus Setup Wizard – M-Bus ASCII communication
If your PiiGAB 900’s license doesn’t have M-Bus ASCII you can ignore this section.
Slave port 3 will be used in this section as M-Bus ASCII communication port. If you don’t have slave port 3
you can use slave port 1 or slave port 2.
This section let you check the M-Bus ASCII configuration for a PiiGAB 900. The M-Bus ASCII client is an
efficient way to check the M-Bus ASCII configuration before connecting to the actual client.
1.
In the main menu of PiiGAB M-Bus setup Wizard, select
Test meters with M-Bus ASCII
2.
Press
Next
to continue
3.
Select
Connect using network
and configure the connection as shown in the picture below
Note: Your PiiGAB 900’s IP-address may not be 192.168.10.183. PiiGAB M-Bus Setup Wizard only fill in
the IP-address automatically as you selected in
Find your PiiGAB 900 on your network
, step 6.
4.
Press
Next
to continue
Содержание M-Bus 900
Страница 1: ...Manual for PiiGAB Start Kit 3 ...