T H E M O D E R N M - B U S T E C H N O L O G Y
PiiGAB Process Information i Göteborg AB
34
81
0M
.E
.1
.1
4
Device Installer
7
The software, Device Installer, is also delivered with the gateway and is there to
help you make advanced settings in the Ethernet part of the gateway. To make
base changes in the Ethernet part we recommend you to use the M-Bus Wizard,
since the M-Bus Wizard is made to simply set up the M-Bus communication.
Although, if you want to use the Device Installer, we refer you to the help in the
software and to the enclosed document for the Device Installer,
DeviceInstaller_UG_900-310.pdf
3
.
You need to keep the following settings to use the M-Bus protocol in mind when
the Device Installer is used:
The correct communication speed (300bps, 2400bps alt 9600bps). Not all
meters support 9600bps. Check with your meter manufacturer what
communication speed to use.
When the M-Bus protocol is used the Port Settings 8, even, 1 should be
made. See below.
Figure 7-1. Port Properties
3
This document can be found at the CD delivered together with the gateway.
Chapter
7
