T H E M O D E R N M - B U S T E C H N O L O G Y
PiiGAB Process Information i Göteborg AB
15
81
0M
.E
.1
.1
4
M-Bus Wizard
4
M-Bus Wizard is a software delivered with the gateway. The software helps you to
make required adjustments in the gateway to establish communication etc. It also
gives you the opportunity to change address and communication speed on the
meters that supports the M-Bus standard, additionally you can see some parts of
the communication towards the meter.
4.1
Starting M-Bus Wizard
Copy the zip-file ”MBus 800 Family Setup Wizard 2.0.1.zip” to the appropriate
folder on the computer and open the file. Install the program by double clicking on
the Setup files or go via the control panel. After the program has been installed
you can start it by choosing the program in the start menu. If the installation has
been made with the base settings the program can be found under the PiiGAB
folder.
The first time you start the program you have to choose a language. If you later
want to change to another language it is also possible.
After the language has been chosen, the introduction picture is presented with a
summary of the M-Bus Wizard usage.
Figure 4-1. Welcome Screen
Click ”Next” to proceed.
Kapitel
4
Chapter
4
