Pifco P28044, Руководство по безопасности и инструкция

Страница: 7 / 12

7 www.pifco.co
Assembly and of your vacuum:
1. Carefully unpack the Vacuum Sweeper.
Ensure that all parts are included before
discarding packaging.
2. Insert the upper part of the handle into
the lower portion.
3. Push the two parts together until you
hear them click in place.
4. To detach the handle: Just push the
button on the back and pull out the
upper part.
Charging your vacuum:
A full charge takes approximately 5 hours.
1. The vacuum will not be charged when
unpacked and so must be charged before
first use. Before charging, ensure that the
appliance is switched off.
2. Connect the charger mains plug to a
suitable mains outlet and the other
adapter into the charging port on the
vacuum.
3. After charging, stand the vacuum
sweeper upright, step on the filter
housing area and pull the handle back,
ready to begin sweeping.
Using your appliance:
Use the power switch on the handle to
turn the device on. If the item fails during
operation, please switch the device off
immediately by using the power switch and
determine the cause using the troubleshooting
guide.
Note:
This vacuum sweeper works best on
smooth surfaces such as wood, ceramic,
tiles and marble. It will also perform well
on hard, short-haired carpet. It should
NOT be used on long-haired carpets as
the fibres will damage the system.
Note:
Keep the brushes free of fibres, hairs, and
other objects that could impede proper
functioning. Always remove them when
it occurs.
Note:
Do not use the device to clean carpet
fringe or frayed carpets.
Push
Push