Pifco P28044, Руководство по безопасности и инструкция

Страница: 8 / 12

8 Customer support team: +44 (0) 333 220 6054
Cleaning and care:
Caution! Never vacuum clean without a filter
or with a damaged filter. Dust that is sucked
into the unit could force its way into the
device and damage the motor.
Emptying dust bin:
1. Remove the dust bin from the Vacuum
sweeper by holding the dust bin handle
and pulling upward until it separates from
the body.
2. Hold the Dust Bin over a suitable
receptacle such as a bin and press
the dust release button to empty the
container.
Cleaning the filter:
When the filter is blocked push the button
located on the dust bin to release the dust cap.
1. Take out the Sponge filter from the Dust
bin
2. Take out the filter housing from the Dust
bin by pulling the filter handle.
3. Holding the Dust bin over a garbage bag
or other receptacle, then pour out the
dirt particles.
4. Remove the filter from the filter housing
by rotating the filter handle anticlockwise
and lifting it off.
5. Shake off the sponge until the majority
of the dust has been removed. Wash the
dust bin, filter housing, filter and sponge
under clean, warm water and allow it to
dry thoroughly.
Important: Allow all filters to dry completely
before replacing in the vacuum sweeper
6. Once all parts have dried fully, put the
filter into the filter housing and rotate the
filter handle clockwise to fix it into place.
7. Insert the filter housing into the dust bin.
Put the sponge into the Dust cap, and
then close the dust cap until it locks back
into position.
8. Place the Dust bin into Vacuum sweeper
pressing it down until you hear it click
into place
Note:
When the Dust Bin is full or the filter is
blocked, they should be cleaned before
further use.
Note:
Do not clean the sponge using detergent.
Push