9
www.pifco.co
Cleaning the brush roller:
1.
Before cleaning the brushroller make sure
the unit is switched off and the power
cord is unplugged.
2.
Turn the vacuum sweeper upside down.
Turn the brush button screw to its unlock
position.
3.
Open the brush housing, lift the tab on
the brush roller up to remove it from the
vacuum sweeper.
4.
Remove any string, carpet fibres, or hair
wrapped around the brush roller. The
groove on the brush roller allows a pair
of scissors to cut the debris without
damaging the bristles.
5.
The brush roller can be removed and
rinsed under running water. Let the brush
roller air-dry completely before replacing
into the vacuum sweeper.
To re-assemble, hold the brush roller by the
tab and align the other end with the gear. Then
with the tab facing up, place the brush roller in
the vacuum sweeper.
Put the brush fixing device into position and
screw the release button to lock position.
Cleaning the exhaust filter:
1.
To remove the exhaust filter for cleaning,
press down the clip on the back of the
exhaust filter housing and lift the cover
away.
2.
Remove the exhaust filter from the
exhaust filter housing.
3.
Shake off the exhaust filter until the
majority of the dust has been removed,
then wash the exhaust filter under
clean, warm water and allow it to dry
thoroughly.
4.
Once the exhaust filter has dried fully,
slot it back into the exhaust filter housing
and replace the exhaust filter housing
cover.
Cleaning the external of the
vacuum:
1.
Use a dry cloth to clean the unit including
the dust bin and remove hair and fibres
from the bristles.
2.
2. Do Not use abrasive material to clean
the device and do not submerge it in
water under any circumstance.
Storage:
•
When the appliance is not in use, store in
a safe, dry place, out of reach of children.
•
DO NOT store the vacuum in direct
sunlight.
Note:
Do not clean the exhaust filter using
detergent.
Do not use external heat sources, such as
a radiator to dry the exhaust filter.
Содержание P28044
Страница 11: ...11 www pifco co Notes ...
