❖ Water must be clean and the Chlorine cont should be less than 100mg/L.
❖ Don't add corrosive water into coffee machine.
❖ Carbonate hardness must be less than 5-6
°
dKH(German carbonate
hardness) or 8.9 -10.7
°
fKH (French carbonate hardness), and to
tal hardness must be always higher than the carbonate hardness.
❖ Minimum carbonate hardness between 5
°
dKH or 8.9
°
fKH. PH sho
uld between 6.5 -7.
❖ Only use a new tube set! It is not permitted to connect old or used
tube sets.
• Water connection under the instructions and the local regulations. If
the machine is connected with a new tube, then make sure the tube is
clean.
• The machine must be connected into the tube which with shut-off tap.
Install the machine on the water tape pressure reducer through pressure
tube and screw connection G 3/8'.(Adjust it to 0.3 MPa (3 bar)).
5. 2 Installation
5. 2. 1
Coffee Machine
• Open the carton box, take out machine and spare parts. The machine
and all accessory units are only permitted to be installed and stored in
frost-free locations.
• Take out machine and accessories, install the cooler at the right side
of coffee machine.
✓ Machine installation.
16
Содержание K95
