Pierce Mid-Mount Ascendant Aerial Tower Скачать руководство пользователя страница 83

Страница: 83 / 132

Mid-Mount Ascendant Aerial Tower / 4-9

OPERATION

8. Use the Truck Manual Leveling Stabilizer Control (Tilt) if further truck leveling is required. Follows are the most

common conditions:

Tilt Forward used alone if Front (Bumper) Stabilizers are not “Firm on Ground”:

— If both front (bumper) stabilizers are not “Firm on Ground”, Tilt Forward to deploy the front (bumper)

stabilizers until both front (bumper) stabilizers are “Firm on Ground”.

— If both front (bumper) stabilizers are “Firm on Ground”, Tilt Forward to deploy the front (bumper) stabilizers

to a deeper set until desired height has been achieved.

Tilt Forward used alone if all six stabilizers are Firm on Ground:

— Tilt apparatus over the middle stabilizers to bring front (bumper) stabilizers lower and rear stabilizers higher.

Tilt Rearward used alone if Rear Stabilizers are not Firm on Ground:

— If both rear stabilizers are not “Firm on Ground”, Tilt Rearward to deploy the rear stabilizers until both rear

stabilizers are “Firm on Ground”.

— If both rear stabilizers are “Firm on Ground”, Tilt Rearward to deploy the rear stabilizers to a deeper set until

achieve a desired height.

Tilt Rearward used alone if all six stabilizers are Firm on Ground

— Tilt apparatus over the middle stabilizers to bring rear stabilizers lower and front (bumper) stabilizers higher.

9. Install wheel chocks on the downhill sides of the #1 and #2 axle tires.

Содержание Mid-Mount Ascendant Aerial Tower






























































































































Результаты поиска

Содержание Mid-Mount Ascendant Aerial Tower

Отзывы:

Pierce Mid-Mount Ascendant Aerial Tower, Руководство пользователя, Страница: 83 / 132

Результаты поиска

Содержание Mid-Mount Ascendant Aerial Tower

Отзывы: