Pierce Mid-Mount Ascendant Aerial Tower Скачать руководство пользователя страница 102

Страница: 102 / 132

OPERATION

4-28 / Mid-Mount Ascendant Aerial Tower

4-7.4

LyfeSupport™ Rescue Basket

(Platform Option)

Figure 4-11: M0351 Safety Label

M0351

When properly installed, the LyfeSupport™ rescue basket supports will support a rescue basket for patient transport.
1. Attach LyfeSupport™ rescue basket arms to mounting brackets at the front of platform with pins.
•

The belt straps must pass through the side openings on the rescue basket.

•

The belt straps must be latched to each other straight across the basket.

•

The belt straps must be properly tensioned to prevent basket movement.

2. Make sure each belt strap is fastened through the holes at each end of the LyfeSupport™ rescue basket arms.

WARNING

Do not paint over this label. Replace if damaged or lost

M0351

Lyfe

Support™ Fall Hazard.

Read operator manual before using
For use with single rescue basket and occupant
Account for weight of

Lyfe

Support™ option, rescue

basket and occupant in load chart calculation
Secure rescue basket and occupant using proper
straps and methods only

Failure to comply may injure or kill.

Содержание Mid-Mount Ascendant Aerial Tower






























































































































Результаты поиска

Содержание Mid-Mount Ascendant Aerial Tower

Отзывы:

Pierce Mid-Mount Ascendant Aerial Tower, Руководство пользователя, Страница: 102 / 132

Результаты поиска

Содержание Mid-Mount Ascendant Aerial Tower

Отзывы: