Pierce Mid-Mount Ascendant Aerial Tower Скачать руководство пользователя страница 101 | Manualshive

Страница: 101 / 132

Pierce Mid-Mount Ascendant Aerial Tower Скачать руководство пользователя страница 101

© 2021 Pierce Manufacturing Inc. All Rights Reserved.

Mid-Mount Ascendant Aerial Tower / 4-27

OPERATION

NOTE:

The Duo-Safety Model 875A (19-inch) Ladder is the only ladder certified for this operation.

The LyfeLadder™ can be attached to the basket for external entrance to the basket or descending to a lower
surface. When properly installed, it has a rated capacity of 500 lbs.

Figure 4-10: LyfeLadder™ Brackets and Pins

POM0857, POM0858

1. Attach two LyfeLadder™ brackets (1) to mounting brackets at side of platform with pins.
2. Position cross rod in hole and place ladder between mounting brackets.
3. Slide ladder out to the desired rung for length of ladder and push cross rod through both ladder rung holes and

opposite mounting brackets.

4. Secure lynch pin to cross rod.
5. With the ladder hanging in the vertical position, secure the rung latch (2) to the appropriate ladder rung.
6. LyfeLadder™ brackets should be stored in a body compartment before driving the apparatus.

The Duo-Safety Model 875A and 878DR Ladder up to 20 feet long are the only ladders certified for this
operation.

2

1

«
...
99
100
101
102
103
...
»

Содержание Mid-Mount Ascendant Aerial Tower





































































































































Отзывы:

Нет отзывов