manualshive.com logo in svg

PictureTel Concorde 4500, Руководство администратора, Страница: 242 / 250

Поделиться
Скачать
PictureTel Concorde 4500 Скачать руководство пользователя страница 242

X.21 CALL PROGRESS MESSAGES

D-16

[none]

n/a

Normal call clearing (16)

This cause indicates that the call is being 
cleared because one of the users involved 
in the call has requested that the call be 
cleared. Under normal situations, the 
source of this cause is not the network.

Normal, unspeciÞed (31)

This cause is used to report a normal 
event only when no other cause in the 
normal class applies.

Quality of Service not available (49)

This cause is used to report that the 
requested Quality of Service, as deÞned in 
Recommendation X.213, cannot be 
provided (for example, throughput or 
transit delay cannot be supported).

Call proceeding

Your call is being connected. 
(91)

n/a

Call delivered

Your call is waiting to be 
answered. (92)

n/a

Table D-1:  X.21 Call Progress Signals and Q.931 Cause Codes  (Continued) 

Message Text

X.21 Signal and Code

Q.931 Cause and Code

Содержание Concorde 4500



























































































































































































































































Отзывы:

Нет отзывов