manualshive.com logo in svg

PictureTel Concorde 4500, Руководство администратора, Страница: 235 / 250

Поделиться
Скачать
PictureTel Concorde 4500 Скачать руководство пользователя страница 235

D-9

Network signaling 
error.

Report if problem 
persists.

Selection signal transmission 
error (23)

A transmission error has 
been detected in the 
selection signals by the 
Þrst Data Switching 
Exchange (DSE).

Invalid information element contents (100)

This cause indicates that the equipment 
sending this cause has received an 
information element which it has 
implemented; however, one or more 
Þelds in the information element are 
coded in a way which has not been 
implemented by the equipment sending 
this cause.

Invalid message, unspeciÞed (95)

This cause is used to report an invalid 
message event only when no other cause 
in the invalid message class applies.

Number dialed is 
unreachable.

Report if problem 
persists.

Access barred (41)

The calling DTE is not 
permitted the connection 
to the called DTE. 
Possible reasons include 
unauthorized access 
between the calling DTE 
and the called DTE or an 
incompatible closed user 
group.

n/a

Number dialed 
has changed.

Obtain and dial 
new number.

Changed number (42)

The called DTE has been 
assigned a new number.

Number changed (22)

This cause is returned to a calling party 
when the called party number indicated 
by the calling party is no longer assigned. 
The new called party number may 
optionally be included in the diagnostic 
Þeld. If a network does not support this 
cause value, cause No. 1, unallocated 
(unassigned) number is used.

Table D-1:  X.21 Call Progress Signals and Q.931 Cause Codes  (Continued) 

Message Text

X.21 Signal and Code

Q.931 Cause and Code

Содержание Concorde 4500



























































































































































































































































Отзывы:

Нет отзывов