manualshive.com logo in svg

PictureTel Concorde 4500, Руководство администратора, Страница: 170 / 250

Поделиться
Скачать
PictureTel Concorde 4500 Скачать руководство пользователя страница 170

OBTAINING DIAGNOSTIC INFORMATION

7-16

a.  This item appears only when your system has an internal CSU daughter board

installed.

Running System Self-Tests

Note:

If you donÕt know which slot a board is in, you can see 
the slot number for each board listed next to the board 
name when the power-up diagnostics run.

To run the diagnostics tests:

1. From the Diagnostics menu, choose View Near-End Tests .

2. Choose Select System Self-Test. 

The results from the last self-test appear.

3. Press ENTER.

The start screen appears.

Run Local Channel Loopback

Displays digitized (compressed and 
decompressed) near-end video image and 
audio.

Refer to page 7-21.

Run CSU Self-Test

a

When you have a CSU, this test takes the CSU 
off-line and runs a self-test.

Refer to page 7-22.

Set Test Configuration

Allows you to change the channel and data 
rate conÞguration for the local channel 
loopback test. The default channel setting is 2 
and the default baud rate is 56 kbps.

Refer to page 7-22.

Stop Test

Halts the test in progress, and displays the 
Near-End Tests menu.

Table 7-9:  Near-End Tests Menu Options

Содержание Concorde 4500



























































































































































































































































Отзывы:

Нет отзывов