manualshive.com logo in svg

PictureTel Concorde 4500, Руководство администратора, Страница: 172 / 250

Поделиться
Скачать
PictureTel Concorde 4500 Скачать руководство пользователя страница 172

OBTAINING DIAGNOSTIC INFORMATION

7-18

6. Enter the number of passes you want to run, and press ENTER.

The following message appears:

7. Do one of the following:

❑

Choose 

Yes

 if you want to reboot and continue with the 

system self-test. The results from the self-tests appear.

While the tests are running, verify that the software PROM 
versions for the camera module and for the system software 
are compatible. Also verify that all board and daughter 
board versions are compatible and appropriate for your 
system.

The following message appears brießy when the tests are 
completed:

РIf any test fails, 

FAIL TEST 

nnn

 appears while the tests are 

running. 

РIf any boards fail the system test, order a replacement for 

the failing board from your PictureTel distributor. 
Installation instructions are packaged with the new 
board.

РIf all tests are successful, the system reboots, and 

PictureTel Ready

 appears.

❑

Choose 

No

 if you do not want the system to reboot. The 

system remains operational.

Continue (reboot)? Yes/No

System initialization in progress  

F Y I 

F.Y.I. 

If you have questions, you can call your PictureTel service 
provider.

Содержание Concorde 4500



























































































































































































































































Отзывы:

Нет отзывов