7
6
SERVICE
6.1
Tool service must only be performed by qualified repair personnel.
Service or maintenance performed by
unqualified personnel may result in a risk of injury.
6.2
When servicing a tool, use only identical replacement parts.
Follow instructions in the Maintenance section of
this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock
or injury.
7
MATERIAL
7.1
Before using Picote Dual Coat Epoxy or Mastic, be sure to read, understand, and follow the instructions of the
manufacturer of that material. Read the MSDS (Material Safety Data Sheet) supplied by the manufacturer of
the material and
all
writing on the material and the container thoroughly.
Material may not dispense
properly if it is not at the proper temperature. Material may pose a health hazard without adequate ventilation.
7.2
DANGER: Do not use to dispense any flammable
or explosive material, any material that
contains
petroleum distillate(s),
or any material that cannot be used safely near sparks or near
electric motors.
Do not use
this
tool, or any other power tool,
if any phrases
such
as
"Flammable", "Explosive", "Keep away from heat, spark, and flame", "Keep away from heat,
spark, open flames and any ignition source", "Petroleum Distillate",
"Distillates (Petroleum)",
"Disconnect electric motors", etc., appear.
This product contains an electric motor. All electric motors
generate sparks and may ignite vapors from materials.
8
CONDITION OF TOOL
8.1
Do not use damaged tools. Lockout or clearly mark
“
DO NOT USE
”
until repaired.
Many accidents are caused
by poorly maintained tools.
8.2
Do not alter or modify tool.
Any alteration or modification is a misuse and may result in a dangerous condition.
SMART MIXER / GENERAL SAFETY RULES
