IR-transmitters Pico4, Pico8 and Pico16
Page 18
5.1 How to do it
•
Turn remote controller up-side down, use a Torx tool
size T10 and remove two screws.
•
Keep front- and back part together, turn transmitter back
with front side up.
•
Remove front cover including keypad. Avoid touching
electronic card.
•
Replace keypad with the new one.
Pico4: keypad may be rotated if needed, see figure.
Please note that keypad shall fit into guiding marked on
figure with a ring.
•
Assemble in opposite order as disassembled and test
functionality.
6
Maintenance
Picomed’s IR transmitters Pico4, Pico8 and Pico16 are battery operated and shall be charged
with the battery charger included. Normally there is no need of regularly maintenance. There
are no fuses etc. to replace. It has to be cleaned when necessary.
6.1 Cleaning
Cleaning of the remote controller should only be done with a moist cloth. It may be used a
mild detergent. It must not become wet or exposed to excess fluids.
