IR-transmitters Pico4, Pico8 and Pico16
Page 11
Figure 1 Main page in the programming menu
By choosing «Keys on page 1», see figure above, you will get access to a menu to make
settings for keys regarding page 1, and so on for the other settings available.
•
To go back one level: swipe to the left or use the browser’s «back» function.
•
Some settings will ask for a confirmation if you change a value, see figure below, press
yes/no to confirm or not.
•
When changes are done, the transmitter confirm it by a low beep.
•
Sliding switches are used to turn functions on/off.
•
Slide switch to the right to turn on a function.
•
Slide switch to the left to turn off a function.
•
Some sliding switches may control more than one value. If the sliding switch is
positioned in the middle (neither on nor off), it means that some of these functions are
on and some are off. If you slide it on or off, all functions controlled by this switch
will be set either to on or to off.
3.5 Explaining some settings
Settings in brackets are factory settings. It is a graphical menu system, which in many ways
are self-explanatory.
Topic
