PICOLAS LDP-C 120-40 NG, Руководство пользователя

Страница: 33 / 40

Rev. 01/2021
32
Commands for the Driver
The following table contains a list of the commands which the driver supports in addition to
the generally applicable commands. An explanation of the individual commands and its
parameters follows afterwards.
The commands are internally organised in the following groups:
Temperature
The driver is equipped with tree temperature sensors, which will monitor the base plate. If any
reaches the value of GETTEMPOFF, the driver is disabled.
Command Sent Frame Received Frame
Command Parameter Command Parameter
GETTEMP 0x0100 0 0x8100 Temp in 0.1°C
GETTEMP1 0x0101 0 0x8100 Temp in 0.1°C
GETTEMP2 0x0102 0 0x8100 Temp in 0.1°C
GETTEMP3 0x0103 0 0x8100 Temp in 0.1°C
GETEMPOFF 0x0104 0 0x8100 Temp in 0.1°C
GETTEMPHYS 0x0105 0 0x8100 Temp in 0.1°C
LSTAT
The Laser Status Register contains all internal settings for the driver. The exact meaning of
each bit is explained in the chapter “Description of the LSTAT register”.
Command Sent Frame Received Frame
Command Parameter Command Parameter
GETLSTAT 0x0200 0 0x8200 32 bit number
SETLSTAT 0x0201 32 bit number 0x8200 32 bit number
ERROR
The Error Register contains information of any pending error. The exact meaning of each bit
is explained in the chapter “Description of the ERROR register”.
Command Sent Frame Received Frame
Command Parameter Command Parameter
GETERROR 0x0300 0 0x8200 32 bit number
CLEARERROR 0x0301 0 0x8200 0