PICOLAS LDP-C 120-40 NG, Руководство пользователя

Страница: 38 / 40

Rev. 01/2021
37
Description of the ERROR Register
The following list contains a description of the individual bits of the ERROR register. A “1”
as a bit leads to a deactivation of the drivers output. Bit 11 is excluded of this directive as it is
just a warning.
Bit Name Read/Write Meaning
0 CRC_DEVDRV Read Indicates a CRC error in the PLB-
Driver. It does not affect the driver,
but might disable the PLB-21 usage.
1 CRC_DEFAULT Read Indicates a CRC error in the stored
default values. The values should be
re-saved
2 CRC_CONFIG Read Indicates a CRC error in the
configuration. The driver must be
repaired
3 CRC_PARAM Read Reserved
4 CRC_CAL Read Indicates a CRC error in the
calibration. The driver must be
repaired
5 VCC_LOW Read Indicates that the Supply voltage is
too low
6 VCC_HIGH Read Indicates that the Supply voltage is
too high
7 VCC_UVLO Read Indicates that the Supply voltage
has dropped during operation.
Check the current limitation of the
power supply.
8 FAILED_DEFAULT Read The default values could not be
loaded during power-on.
9 TEMP_OVERSTEPPED Read The operation temperature has
exceeded 80°C
10 TEMP_HYSTERESE Read The driver needs to cool down
11 TEMP_WARNING Read The drivers operation temperature
reaches critical levels
12 ENABLE_POWERON Read Enable was given during power-on
13 ENABLE_ENCHANGE Read Enable was given while switching
between internal / external
14 PWM_MAX Read The current regulator was unable to
generate the desired output current