PICOBREW Z SERIES
CaRE anD maIntaInanCE | 38
04.
After cleaning, rinse well, and follow by sanitizing with a
food grade sanitizing solution such as StarSan.
Consult the “How to clean your keg video” on the PicoBrew
website for help here.
Deep Clean
After every three brews, or if your Z is not going to be used
for more than a couple of weeks, you will need to run a clean
cycle on your Z. For the clean cycle, you will need a dishwasher
tablet (one has been included in your kit). Use Finish Powerball
Dishwasher Tablets or Zymatic Cleaning Tablets. Do not use
dishwasher gel packs or gel coated tablets.
CAUTION: The Clean cycle heats water to boiling temperature,
do not use any unsafe cleaning agents.
01.
In the Utilities menu, select Clean and click to begin.
02.
Fill a keg with 1.5 gallons of Water.
03.
Place the dishwasher tablet in the keg (see above for
approved types).
04.
Place keg cozy on keg and insert a Keg Seal into the
mouth of the keg. The foam trap is not necessary for this
step.
05.
Attach hoses to keg.
06.
Install the Bottom Mash Screen, Adjunct Screen and Top
Mash Screen into your Step Filter. Note that the Bottom
Mash Screen, Adjunct Screen, and Top Mash Screen may
be washed in the dishwasher, or included in the Step
Filter during the Deep Clean cycle.
07.
Place the lid on the Step Filter, ensuring that the Drain
Tube and Drain Grommet are installed.
