PICOBREW Z SERIES
lEt'S BREW | 21
Let’s Brew Beer
Once your equipment is clean, it’s time to get brewing! Follow
the steps below to get started:
01.
Make sure that you have synced any recipes that you
would like to brew in the ‘My Recipes’ section of your
picobrew.com account
02.
From the main menu of your Z, select ‘My Recipes’, select
the recipe you want to brew, and then follow the on-
screen prompts to complete steps detailed below.
03.
Ensure Step Filter Keyhole Plug is installed.
04.
Measure (and grind, if necessary) your grain. Place the
Bottom Mash Screen into the mash compartment. Press
down firmly so that it rests level on the bottom ledge of
the Step Filter with no gaps. Pour grain into the mash
compartment on top of the Bottom Mash Screen.
05.
Level the grain with your hand. Do not compact. Place
the Top Mash Screen on the top ledge of the Step Filter
so it rests above the grain. Make sure that the groove in
the edge of the Top Mash Screen faces downward, fitted
onto the top of the divider that separates the mash and
adjunct compartments.
06.
Place the Adjunct Screen in the bottom of the Adjunct
Compartment of the Step Filter, resting on the bottom
ledge. Ensure that the semi-circular cutout matches up
with the Drain Tube indentation.
07.
Measure hops and place in appropriate Hop Cages.
Secure the Hop Cage Lids.
