![PicoBrew PICO Скачать руководство пользователя страница 27](http://html1.mh-extra.com/html/picobrew/pico/pico_instruction-manual_1555425027.webp)
unboxing
setup
first
rinse
let's
brew
after
brewing
ferment
your beer
dry
hopping
ra
ck &
carbona
te
serving
usa
ge &
care
glossary
pico instruction manual
52
53
Rinse the Step Filter and lid with clean tap water.
Fill the clean Step Filter with approximately 1 inch
of tap water. Insert the Step Filter and lid back into
the Pico until it clicks.
For each Ball Lock Connector, pull up on the outer
ring of the Connector and insert a Keg Wand. Release
the ring and make sure it is properly connected to the
Keg Wand.
₃
tap water
₄
Direct the end of the GRAY Ball Lock Connector (“IN”)
Keg Wand into a waste container or directly into a
sink nearby. Press the Control Knob to start Rinse
Cycle. Pico will clear the drain line into the waste
container, then prompt you to empty the reservoir.
bill’s
pro tip:
Make sure you use a big
enough waste water container!
The gallon water jug you used
to fill the machine is perfect
for this use.
Содержание PICO
Страница 83: ...brewingnotes brewingnotes ...
Страница 84: ... PicoBrewInc 2016 www PicoBrew com 16 1213 ...