17 |
P a g e
CHAPTER 4: HARDWARE GUIDE
This section will guide you through the installation of your FMGuard. Follow the instructions here
and you will have your FMGuard installed very quickly.
Mounting
Determine a suitable location for FMGuard. Mount FMGuard on a din-rail as illustrated below.
1
–
Slide the top of FMGuard onto the din-rail
2
–
Push the bottom of FMGuard onto the until the lock on the bottom clicked.
3
–
Test if the device is properly mounted by trying to move it away from the din-rail, do not exert
too much force on this test.
FMGUARD Installation
Step 1 - Determine a suitable location for FMGuard when selecting a location, remember that
you will need to connect the power adapter, termination blocks and Ethernet cable, and have
suitable GSM reception. Follow carefully the instructions provided earlier in this manual on the
safe use of this device and the instructions above on mounting FMGuard on to the Din-Rail.
Step 2
–
Insert a valid 3G or 2G Micro SIM card into the SIM card socket slot the bottom of
FMGuard.
•
Below shows the exact orientation of how the Micro SIM card should be inserted
into the SIM card slot.
•
Slide it in all the way until you feel it touching the end. Lock the SIM card by
moving the mechanical lock to the right. To remove, move the mechanical lock
to the left then gently press on the SIM card using a small slot head screwdriver.
Step 3
–
Attach the antenna provided in the package onto the antenna socket. If an external
antenna is required, contact your distributor for more information on external high gain antenna.
