Pichler MINI DOMINO C9795, Инструкция по эксплуатации

Страница: 4 / 16

4
MINI DOMINO
2. SICHERHEITSHINWEISE / SAFETY INSTRUCTIONS
GENERAL SAFETY INSTRUCTIONS FOR ELECTRIC MODELS
• This is not a toy! Suitable for young people under the age of 14 with adult supervision.
• Use the model accordingly to chapter "How To Use" in this instruction manual.
• Assemble the model accordingly to this instruction manual. Do not alter or modify the model. Only use parts that are officially
recommended by Pichler Modellbau.
• Always pay close attention to the manuals that are included to accessory parts (radio system, speed controller, battery etc.).
• Do not fly the model before you have finished the assembly completely according to this manual.
• Before you fly, check all functions of the model carefully.
• Never fly your model near other human beings, animals or other obstacles. You are responsible for flying the model, so
you have to check carefully your flight area.
• NEVER use your model on public streets or near public airports.
• Stop flying immediately if you realize any radio interference.
• Do not touch any moving or hot motor parts during action! Let all components cool down before you handle them.
• Check your model carefully after each flight. Replace parts if they are worn out or if they are defective.
• Keep your hands out of reach from rotating or hot parts of the model.
• Keep in mind that plastic parts easily break under cold temperature conditions.
• If you are a novice in flying you should ask experienced pilots for assistance during your first flights. The local model associations will
help you to find an adequate flying club in your local area:
Deutscher Modellflieger Verband e. V. Österreichischer Aero-Club, Sektion Modellflug.
Rochusstraße 104-106 Prinz-Eugen-Straße12
D-53123 Bonn A-1040 Wien
http://www.dmfv.aero http://www.prop.at
• Protect yourself from dust and other small things when you test run your propeller drive on the ground.
• Keep all electronic components dry and clean!
• Take care that your motor does not get overload or gets blocked under full power.
• Let the motor cool down after restarting the model again.
• Charge your batteries carefully. Always watch the charging process and make sure all connectors are in good conditions.
• Do not shorten the battery by connecting the pluspole with the minuspole directly!
• Make sure that the wires do not touch rotating or hot parts of the model.