-5-
PKI-0041
● Use the recommended torque and apply equal force when tightening the Hexagon socket head bolt
(M4/Item ⑩ ).
● Do not install more than 3 lamp main units.
● When connecting lamp units “RF6” and “RF10”, we recommend that 2 Installation brackets (Item ② )
be used on each lamp unit.
If there is a problem with the installation position and only one Installation bracket can be installed on
each lamp, install it on the outer hole from center.
● When installing and using the “RF18” unit, make sure to install 2 Installation brackets (Item ② ) at
2 positions on each lamp.
Installation bracket
【1】Installation preparations
×２
Hex nut
( S/Item ⑧ )
Slider (Item ⑦ )
（１）Combine the Slider (Item ⑦ ) and the Hex nut ( S/Item ⑧ )
as shown in the figure below.
Center
Center
Center
Center
Center
Center
