4.3.2 access protection
To avoid an inadvertent change of the configuration as well as enabling,
disabling or triggering a time adjust for a station the complete web page
can be protected with a password.
The configuration of the password is done on the page “configuration”. If
an empty password is specified, as it is the case on factory defaults, no
password query will be shown and all pages can be accessed directly.
If you have configured a password, you will be queried to enter a
password with the following dialog:
After you have entered the password and clicked on “log in” you will be
redirected to the page, which was requested before.
Because of security reasons we recommend to log out of the device after
you have finished your work. Therefore you will see the menu entry “log
out” on the menu:
After you have clicked on the menu entry you will see the following
message and will be redirected to the start page after 5 seconds, which
then queries for a password again:
manual S5/S7-TimeServer V1.00
page 12
