PI P-603 Series, Руководство пользователя, Страница: 9 / 21

User Manual
P603T0001, valid for P-603
CBo, 1/11/2021
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 9 / 21
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws , www.pi.ws
NOTICE
Damage after reconnecting due to a charged P-603!
The P-603 can remain charged if its connecting cable is disconnected from the electronics
during operation. Reconnecting a charged P-603 to electronics during operation can cause a
mechanical impulse that will damage the P-603.

Do not disconnect the P-603 from the electronics during operation.

If the P-603’s connecting cable was accidentally disconnected from the electronics during
operation, switch off the electronics before reconnecting.
Thermal Dangers
CAUTION
Burning from hot surface!
The surface of the P-603 and the surrounding area can heat up during operation. Touching the
P-603 and surrounding parts can result in minor injuries from burning.

Make sure that the hot P-603 and its surrounding parts cannot be touched.
NOTICE
Heating up of the P-603 during operation!
The heat produced during dynamic operation of the P-603 can affect your application.

Install the P-603 so that your application is not affected by the dissipating heat.
Product Description
Model Overview
Model Travel range Sensor Connection to electronics
P-603.101 100 µm - Stranded wires
P-603.1S1 100 µm SGS Stranded wires
P-603.1S2 100 µm SGS LEMO
P-603.301 300 µm - Stranded wires
P-603.3S1 300 µm SGS Stranded wires
P-603.3S2 300 µm SGS LEMO
P-603.501 500 µm - Stranded wires
P-603.5S1 500 µm SGS Stranded wires
P-603.5S2 500 µm SGS LEMO