User Manual
P603T0001, valid for P-603
CBo, 1/11/2021
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 15 / 21
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
Cleaning the P-603
Requirements
You have discharged the P-603 (p. 14).
You have disconnected the P-603 from the electronics.
Cleaning the P-603
Touch the piezo actuator only with powder-free nitrile or latex gloves.
Use pH-neutral cleansers only.
Do
not
use acetone and do
not
use water for cleaning.
When necessary, clean the base body (
not
the actuator!) of the P-603 with a lint-free
cloth that is dampened with a mild cleanser (e.g., isopropanol or ethanol).
Customer Service
For inquiries and orders, contact your PI sales engineer or send us an email (
If you have any questions concerning your system, provide the following information:
−
Product and serial numbers of all products in the system
−
Firmware version of the controller (if applicable)
−
Version of the driver or the software (if applicable)
−
Operating system on the PC (if applicable)
If possible: Take photographs or make videos of your system that can be sent to our
customer service department if requested.
The latest versions of the user manuals are available for download (p. 5) on our website.