PI N--472 10 Series, Руководство пользователя, Страница: 37 / 57

8 Troubleshooting
N­472 Linear Actuator MP144E Version: 1.3.0 33
Problem Possible causes Solution
No or limited
motion

The cable is not
connected correctly
or is defective

Check the connecting cables.

Excessive
counterforces in
the direction of
motion

Reduce the load. Pay attention to the
information in the "Technical Data" section
(p. 37).

Parameters of the
controller
incorrectly set

Load the parameter set from the positioner
database that corresponds to the N-472
model.

If necessary: In the PIMikroMove PC
program, set the parameters of the
controller so that they correspond to the
application (load, orientation) of the N-472
model (see user manual for the controller).

Motor/drive is
blocked

Loosen the fine-threaded screw by turning
the screw head backwards and forwards by
hand.
If the problem that occurred with your system is not listed in the table above or cannot be
solved as described, contact our customer service department (p. 35).
8 Troubleshooting