PI Manufacturing 6917 Скачать руководство пользователя страница 48

Страница: 48 / 64

Fragment

Threshold

“Fragment Threshold” specifies the maximum size of packet during the fragmentation of data to be

transmitted. If you set this value too low, it will result in bad performance.

RTS Threshold

When the packet size is smaller than the RTS threshold, the access point will not use the

RTS/CTS mechanism to send this packet.

Beacon

Interval

The interval of time that this access point broadcast a beacon. Beacon is used to synchronize the

wireless network.

Data Rate

The “Data Rate” is the rate this access point uses to transmit data packets. The access point will

use the highest possible selected transmission rate to transmit the data packets.

Preamble Type

Preamble type defines the length of CRC block in the frames during the wireless communication.

“Short Preamble” is suitable for high traffic wireless network. “Long Preamble” can provide more

reliable communication.

Broadcast

ESSID

If you enable “Broadcast ESSID”, every wireless station located within the coverage of this access

point can discover this access point easily. If you are building a public wireless network, enabling

this feature is recommended. Disabling “Broadcast ESSID” can provide better security.

IAPP

If you enable “IAPP”, the access point will automatically broadcast information of associated

wireless stations to its neighbors. This will help wireless station roaming smoothly between access

points. If you have more than one access points in your wireless LAN and wireless stations have

roaming requirements, enabling this feature is recommended. Disabling “IAPP” can provide better

security.

802.11g

Protection

This is also called CTS Protection. It is recommended to enable the protection mechanism. This

mechanism can decrease the rate of data collision between 802.11b and 802.11g wireless

stations. When the protection mode is enabled, the throughput of the AP will be a little lower due to

many of frame traffic should be transmitted.

Click

Apply

button at the bottom of the screen to save the above configurations. You can now

configure other advance sections or start using the Access Point.

Содержание 6917

































































Результаты поиска

Содержание 6917

Отзывы:

Похожие инструкции для 6917

Бренды по названию

Популярные бренды

PI Manufacturing 6917, Инструкция по установке и эксплуатации

Результаты поиска

Содержание 6917

Отзывы:

Похожие инструкции для 6917

Бренды по названию

Популярные бренды