Channel Number
Select the appropriate channel from the list provided to correspond with your network
settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
There are 14 channels available.
You should assign Channel Number in “AP mode”, “Station-Ad Hoc mode”, “AP
Bridge-Point to Point mode”, “AP Bridge-Point to Multi-Point mode” and “AP Bridge-WDS
mode”, “Universal Repeater mode”.
AC Address
If you want to bridge more than one wired Ethernet networks together with wireless LAN,
you have to set this access point to “AP Bridge-Point to Point mode”, “AP Bridge-Point to
Multi-Point mode” or “AP Bridge-WDS mode”. You have to enter the MAC addresses of
other access points that join the bridging work.
WLAN MAC
In “Station-Ad Hoc mode”, “Station-Infrastructure mode” and “Universal Repeater mode”,
this device need a WLAN MAC address to act as a station to connect to other peer or
access point. You also can click “Clone MAC” button to let this device copy the MAC
address of the PC you are using to configure this device.
Root AP SSID
In “Universal Repeater mode”, this device can act as a station to connect to a Root AP.
You should assign the SSID of the Root AP here.
Set Security
In “AP Bridge-Point to Point mode”, ““AP Bridge-Point to Multi-Point mode” and “AP
Bridge-WDS mode”, you can click “Set Security” to add encryption for the communication
between the bridged access points. This can protect your wireless network.
Associated Clients
Click “Show Active Clients” button, then an “Active Wireless Client Table” will pop up.
You can see the status of all active wireless stations that are connecting to the access
point.
Wireless Site Survey
When you use this access point as a wireless station for wired network device to have
wireless capability, you have to associate it will an working access point. Click “Select
Site Survey” button, then a “Wireless Site Survey Table” will pop up. It will list all
available access points near by. You can select one access point in the table and it will
join wireless LAN through this access point.
Click
Apply
button at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the Access Point.
41
Содержание 6917
